Axle Straps, cargo control products from S-line

	S-Line Axle Straps provide a safe anchor point for car tie-downs while the vehicle is in transit. Unless specified, all Axle Straps come with 12" cordura sleeves for abrasion and heat resistance. Axle Straps and car tie downs are available in 5,000 and 10,000 lb. capacities. See the recommended tie-down instructions and working load limit requirements.

	5,000 LB AXLE STRAPS assembly web breaking working width length strength load limit 35 AS21 2” 21" 5,000 lbs. 1,666 lbs. assembly web breaking working width length strength load limit 35 AS33 2” 33" 5,000 lbs. 1,666 lbs.		10,000 LB AXLE STRAPS assembly web breaking working width length strength load limit 30 AS21 2” 21" 10,000 lbs. 3,333 lbs. assembly web breaking working width length strength load limit 30 AS33 2” 33" 10,000 lbs. 3,333 lbs.

	All axle straps are available in (6) six colors: Red, Blue, Black, Orange, Yellow and Gray. Available in 5M# Delta Rings & 10M# Delta Rings with or without Protective Sleeves

	TIE-DOWN INSTRUCTIONS 1. The Working Load capacity is the maximum load an assembly should be subjected to during normal use. For your safety, S-line recommends that the Working Load not exceed 1/3 of a product's Rated Capacity.
	2. Check tie-down and anchor point every 25 miles. 3. Protect webbing from sharp edges and heat. Replace if webbing is cut, worn or damaged. 4. Check Wheeled Vehicles-Do not use for lifting, only as a tie-down. 5. Hook and webbing should be in straight line with load. S-Line Cargo Control Products 11414 Mathis Dallas, TX 75234 Phone: 800.687.9900 \| Fax: 972.402.9020 E-mail: web.master@s-line.com